Shop

RMK Trumpet Gear

Mouthpiece organizers, stand holders, cases and mute storage, designed and 3D printed by Ryan M. King, a working trumpet player.

Organizers · On the stand · Cases & adapters · Practice mute · Mute storage · Accessories · Piccolo stands · Shipping & Returns · FAQ

Most prices include free US shipping, as shown on each product.

Custom colors and designs are available on request. Contact me for details.

RMK Trumpet Gear is now on Etsy. Item checkout links are coming soon. For questions, please get in touch.

Shop on Etsy

Mouthpiece organizers

Desk organizers that hold mouthpieces upright by the shank.

Black mouthpiece organizer with a row of shank holes, 6 cup seats and rim slots
Mouthpiece organizers in orange, brown and white, loaded with mouthpiecesComputer render: black mouthpiece organizer with 2 rim slots, three-quarter viewComputer render: black mouthpiece organizer with 2 rim slots, top viewComputer render: black mouthpiece organizer with 2 rim slots, low side viewComputer render: black mouthpiece organizer with 2 rim slots, underside

Mouthpiece Organizer with 2 Rim Slots

Holds 10 trumpet and 4 cornet mouthpieces by the shank, with 6 stepped cup seats (they also hold Warburton-style cups) and 2 deep slots for Bob Reeves rims. Rubber feet keep it put on a shelf or stand.

82.6 × 157.5 × 38.1 mm (about 3.3 × 6.2 × 1.5″). Four recesses underneath take ½″ bumpon feet, which are included. Printed in PLA.

Some images are computer renders.

$35 · free US shipping
Coming soon
RenderComputer render: black RMK Mouthpiece Grid Bin with 2 rim slots
Computer render: black Gridfinity mouthpiece organizer, top viewComputer render: black Gridfinity mouthpiece organizer, low side viewComputer render: black Gridfinity mouthpiece organizer, underside with Gridfinity base

RMK Mouthpiece Grid Bin

The same layout as the organizer above (10 trumpet + 4 cornet taper holes, 6 cup seats, 2 Bob Reeves rim slots) on a Gridfinity 2×4 base, so it drops straight into a Gridfinity drawer, toolbox or baseplate.

83.5 × 167.5 × 42.9 mm (about 3.3 × 6.6 × 1.7″). It uses Gridfinity feet, so there are no bumpon feet. Printed in PLA.

Image is a computer render, not a photo of a printed part.

$38 · free US shippingOption: add a 4x4 Gridfinity baseplate, +$8
Coming soon
Black organizer for 8 mouthpiece cups, with a row of taper holes and eight cup seats

8 Mouthpiece Cup Holder

A desk organizer built around cup seats: 8 stepped seats for trumpet mouthpiece cups (including Warburton-style cups) plus 10 Bach-style trumpet taper holes for complete mouthpieces or shanks.

88.9 × 157.5 × 38.1 mm (about 3.5 × 6.2 × 1.5″). Four bumpon feet included. Printed in PLA.

$35 · free US shipping
Coming soon
Black 50-hole trumpet mouthpiece grid, filled with mouthpieces, with the RMK logo
Black 50-hole trumpet mouthpiece grid, empty, with the RMK logoUnderside of the 50-hole mouthpiece grid, showing bumpon feet

50 Trumpet Mouthpiece Grid

A compact mouthpiece grid with 50 Bach-style trumpet taper holes in a 5×10 layout. Mouthpieces stand upright by the shank. Ideal for large collections, backbores and teaching studios.

88.9 × 157.5 × 38.1 mm (about 3.5 × 6.2 × 1.5″). Four bumpon feet included. Printed in PLA.

$45 · free US shipping
Coming soon
Black 35 trumpet + 15 cornet mouthpiece grid, filled with mouthpieces, with the RMK logo
Black 35 trumpet + 15 cornet mouthpiece grid, empty, with the RMK logoUnderside of the 35 + 15 mouthpiece grid, showing bumpon feetComputer render: 35 trumpet + 15 cornet mouthpiece grid

35 Trumpet + 15 Cornet Mouthpiece Grid

The same compact grid with 35 trumpet holes and 15 cornet holes, for players who keep both. If you mostly play trumpet but keep a few cornet pieces on the desk, this saves using a Cornet Shank Adapter in every hole.

88.9 × 157.5 × 38.1 mm (about 3.5 × 6.2 × 1.5″). Four bumpon feet included. Printed in PLA.

Some images are computer renders.

$45 · free US shipping
Coming soon
RMK Gridfinity 4x4 Organizer Set: the 8-cup bin and 50-hole bin, filled, on a 4x4 baseplate
Empty Gridfinity 4x4 baseplateComputer render: the set on its Gridfinity baseplateComputer render: the set from the cup holder sideComputer render: the set, showing the RMK logo

RMK Gridfinity 4x4 Organizer Set

A Gridfinity 4x4 baseplate (about 6.6″ square) with two snap-in organizers side by side: the 8 Mouthpiece Cup Holder (8 cup seats plus 10 trumpet backbore holes) and the 50 Trumpet Mouthpiece Grid.

Printed in black PLA with the RMK logo and rmktrumpet.com on the side. Works with any Gridfinity system, and the bins can be swapped or rearranged. A good pick if you want more than one organizer.

Baseplate: 168 × 168 × 4.65 mm, standard open-frame Gridfinity plate. Each bin: 83.5 × 167.5 × 42.85 mm. No hardware.

Some images are computer renders.

$75 for the set · free US shippingGridfinity bins also sold separately: 8 Mouthpiece Cup Holder bin $35, 50 Trumpet Mouthpiece Grid bin $45. Each bin has a Baseplate option: add a 4x4 baseplate for +$8.
Coming soon
Gridfinity 8-cup holder bin, filled with cups and shanks
Gridfinity 8-cup holder bin, empty, showing eight cup seats and a row of taper holesUnderside of the 8-cup Gridfinity bin, showing 2x4 Gridfinity feetThe 8-cup bin in front of the 50-hole bin, as part of the 4x4 setComputer render: 8-cup holder as a Gridfinity 2x4 bin

8 Mouthpiece Cup Holder — Gridfinity 2x4 Bin

The 8 Mouthpiece Cup Holder as a Gridfinity 2×4 bin: 8 stepped cup seats plus 10 trumpet taper/backbore holes. Hole sizes and depths match the standard 8 Mouthpiece Cup Holder. It sits on a Gridfinity baseplate, which you can add as an option (+$8), or get as part of the 4x4 set.

83.5 × 167.5 × 42.85 mm (about 3.3 × 6.6 × 1.7″). Printed in PLA.

Some images are computer renders.

$35 · free US shippingOption: add a 4x4 Gridfinity baseplate, +$8
Coming soon
Gridfinity 50-hole trumpet mouthpiece bin, empty, with the RMK logo
Underside of the 50-hole Gridfinity bin, showing 2x4 Gridfinity feetThe 50-hole bin at the back of the 4x4 set, filled with mouthpiecesComputer render: 50-hole grid as a Gridfinity 2x4 bin

50 Trumpet Mouthpiece Grid — Gridfinity 2x4 Bin

The 50 Trumpet Mouthpiece Grid as a Gridfinity 2×4 bin, with 50 Bach-style trumpet taper holes in a 5×10 layout. Hole sizes and depths match the standard 50 Trumpet Mouthpiece Grid. It sits on a Gridfinity baseplate, which you can add as an option (+$8), or get as part of the 4x4 set.

83.5 × 167.5 × 42.85 mm (about 3.3 × 6.6 × 1.7″). Printed in PLA.

Some images are computer renders.

$45 · free US shippingOption: add a 4x4 Gridfinity baseplate, +$8
Coming soon

On the music stand

Holders that clip onto a Manhasset-style stand so gear stays within reach.

4-seat stand mouthpiece holder, filled, with the RMK logo
4-seat stand mouthpiece holder clipped to a music stand, holding mouthpieces4-seat stand mouthpiece holder, empty, showing the clip profileComputer render: 4-seat stand mouthpiece holderComputer render: 4-seat stand mouthpiece holder, three-quarter view

Stand Mouthpiece Holder — 4

Clips onto the front ledge of a Manhasset #48 stand and holds 4 mouthpieces by the shank, rims level and within reach while you play. Open bottom lets moisture drain.

Seats are 34 mm apart, and rims sit level at the stand’s 20° desk tilt. A spring clip with a grip bump self-locks under load. The Cornet Shank Adapter also fits these seats. About 134 × 67 × 71 mm (5.3 × 2.6 × 2.8″) as mounted. Printed in PLA.

Some images are computer renders.

$22 · free US shipping
Coming soon
2-seat stand mouthpiece holder, filled, with the RMK logo
2-seat stand mouthpiece holder clipped to a music stand, holding mouthpieces2-seat stand mouthpiece holder, empty, showing the clip profileComputer render: 2-seat stand mouthpiece holder

Stand Mouthpiece Holder — 2

The 2-mouthpiece version of the stand holder: same spring clip and shank seats in a smaller footprint.

Seats are 34 mm apart, and the open bottom lets moisture drain. The Cornet Shank Adapter also fits these seats. About 66 × 67 × 71 mm (2.6 × 2.6 × 2.8″) as mounted. Printed in PLA.

Some images are computer renders.

$16 · free US shippingAdd-on: $12 when added to another order
Coming soon
RenderComputer render: accessory caddy loaded with oil, grease, pencils and a cloth
Computer render: accessory caddy hanging on a music stand ledgeComputer render: empty accessory caddy, three-quarter view

Accessory Caddy

One caddy for the desk or stand ledge: wells for valve oil and slide grease, 8 pencil holes, a small-parts bin and a cleaning-cloth slot. It sits on four bumpon feet, or hangs from the front ledge of a Manhasset stand on two gravity hooks.

The valve-oil well fits a flat Yamaha 60 ml bottle or a round 2 oz bottle, with a finger notch and drip dish. Slide-grease well 40 mm across; pencil holes 9.3 mm; accessories bin 36 × 42 mm; cloth slot 164 × 14 mm. About 168 × 78 × 75 mm (6.6 × 3.1 × 3.0″). Printed in PLA.

Image is a computer render, not a photo of a printed part.

$30 · free US shipping
Coming soon

Cases & adapters

Protection for the gig bag, and a small part that makes any trumpet hole cornet-ready.

Single mouthpiece case, open, with one mouthpiece standing in the seat
Single mouthpiece case, closedComputer render: 1-mouthpiece case, open, with a mouthpieceComputer render: 1-mouthpiece case, closed

Mouthpiece Case — 1

A rigid single-mouthpiece case with a twist-lock lid and a keyring loop. The mouthpiece sits in a shank seat and the lid clears the rim by 2 mm. A drain hole is built in.

Fits mouthpieces up to 90 mm long with rims up to 28 mm. Printed in PLA.

Some images are computer renders.

$16 · free US shippingAdd-on: $10 when added to another order
Coming soon
2-mouthpiece case, open, holding two mouthpieces, with the RMK logo
2-mouthpiece case, closed, with the RMK logoComputer render: 2-mouthpiece case, open, with mouthpiecesComputer render: 2-mouthpiece case, closed

Mouthpiece Case — 2

A rigid 2-mouthpiece case with a snap lid and a thumb notch for one-hand opening. Each mouthpiece sits in a shank seat, the lid clears the rim by 2 mm, and a drain hole is built in.

Fits mouthpieces up to 90 mm long with rims up to 28 mm. Printed in PLA.

Some images are computer renders.

$20 · free US shipping
Coming soon
4-mouthpiece case, open, holding four mouthpieces, with the RMK logo
4-mouthpiece case, open and empty, with the RMK logo4-mouthpiece case, closed, with the RMK logoComputer render: 4-mouthpiece case, open, with mouthpieces

Mouthpiece Case — 4

A rigid 4-mouthpiece case in a single row, with a snap lid and thumb notch. Each mouthpiece sits in a shank seat, the lid clears the rim by 2 mm, and a drain hole is built in.

Fits mouthpieces up to 90 mm long with rims up to 28 mm. Printed in PLA.

Some images are computer renders.

$26 · free US shipping
Coming soon
Five cornet shank adapters standing together
Computer render: cornet shank adapter, two angles

Cornet Shank Adapter

Drops into any trumpet hole of the organizers or stand holders and gives it a cornet-taper socket, so any trumpet hole can hold a cornet mouthpiece. The bottom is shaped like a Bach trumpet shank; the top is a cornet-taper socket.

Each adapter is 14.2 × 14.2 × 54.25 mm, with a 14.2 mm flange and a 2.4 mm air vent. Printed in PLA.

Some images are computer renders.

$18 for a 5-pack · free US shippingAlso sold as a 10-pack for $25.Add-on to another order: 1 for $5, 3 for $12, 5 for $15, or 10 for $25
Coming soon

Practice mute

RenderComputer render: RMK Tunable Cartridge Practice Mute v1.4, assembled with a cartridge
Computer render: practice mute v1.4, side viewComputer render: practice mute v1.4, cartridge endComputer render: practice mute v1.4 cutaway with the Standard cartridge seated

RMK Tunable Cartridge Practice Mute

A 3D-printed practice mute for B♭ trumpet, designed by RMK, with two twist-on cartridges so you can change the feel: Standard (more resistance, quieter) and Open (freer blow, a little louder). Both cartridges are included. A TPU gasket sits at the twist-lock between the body and the cartridge.

This is v1.4, the newest version. The body is about 3″ (76.2 mm) across and 89 mm long (92.5 mm with a cartridge on). Body and cartridges are printed in PLA; the gasket is TPU.

Images are computer renders, not photos of a printed part.

$45 · free US shippingIncludes both Standard and Open cartridges
Coming soon

Mute storage

Single mute holder on a music stand, holding two mouthpieces, valve oil, a pencil, and a mute
Single mute holder, empty, showing the mute hole, mouthpiece seats, and tray cutoutsBack of the single mute holder, with the RMK logoSingle mute holder on a stand with a copper mute in the holeSingle mute holder on a stand with a wood mute in the holeComputer render: RMK Single Mute Holder

RMK Single Mute Holder

Clips onto the front ledge of a Manhasset music stand and holds a straight mute in a 74.5 mm (2.935″) straight through-hole; cup and harmon mutes and the RMK practice mute fit too. Two trumpet mouthpiece seats, one at each end of the shelf, use a Bach-style (Morse #1) taper, so mouthpieces stand upright and lift straight out. The pencil tray fits a regular pencil and an Apple Pencil.

RMK logo on the back. About 4.3 × 6.7 × 5.9″ (109 × 171 × 150 mm), about 4.4 oz, printed in PLA. Your stand needs about 8.3″ (21 cm) of free space below the ledge for the longest mute.

Some images are computer renders.

$22 · free US shippingAdd-on: $15 when added to another order
Coming soon
Black Mute Holder Extension, studio shot, with the RMK logo
Mute Holder Extension, studio shot from another angleMute Holder Extension clipped into a Hercules HA100 mute holderMute Holder Extension on a Hercules HA100, holding mutesClose-up of the Mute Holder Extension fitted on a Hercules HA100Computer render: Mute Holder Extension

Mute Holder Extension

A two-ring extension with a ⅛″ lip, made to work with the Hercules HA100 mute holder (sold separately). It push-fits into the HA100’s 74 mm foam-lined ring with no tools; the holder’s ring sits between the extension’s plate and the lip, which keeps it in place. On top, a 2.75″ (69.84 mm) opening holds a mute or the Accessory Tray.

It’s a snug fit on purpose, so it grips the foam; expect a firm push to seat it. This is version 2.1, fit-tested on the Hercules HA100 only, not on other Hercules holders. Ring 75.71 mm outside, lip 86.89 mm outside, 20.3 mm tall. Printed in PLA.

Some images are computer renders.

$15 · free US shippingAdd-on: $10 when added to another order
Coming soon
Underside of the mute holder tray, showing the plug and RMK logo
Mute holder tray, empty, showing the lip around the topMute holder tray in use, seated in the Mute Holder Extension on a Hercules HA100Computer render: accessory tray for the Mute Holder Extension

Accessory Tray for Mute Holder Extension

A 6″ square accessory tray with a ¼″ lip that works with the Mute Holder Extension. It fills one of the spots in either the Hercules HA100 mute holder or the Mute Holder Extension. Made in one piece; 152.4 × 152.4 × 22.2 mm. Printed in PLA.

Some images are computer renders.

$18 · free US shipping
Coming soon

Accessories

Mic Wire Clip on a trumpet, holding a wireless mic cable at the bell
Mic Wire Clip on a trumpet third-valve slide tube, with a hand holding the hornMic Wire Clips on a white backgroundClose-up of a Mic Wire Clip holding a cable on a slide tubeComputer render: Mic Wire ClipComputer render: clip on a slide tube holding a mic cable

RMK Mic Wire Clip for Wireless Mics & Yamaha Silent Brass

A snap-on clip for the 1st and 3rd valve slide tubes (½″ / 12.7 mm) that holds a thin (about 2 mm) wireless mic cable neatly along the bottom of the trumpet. It has a breakaway fit, so it pops off under too much tension instead of yanking the mic. It also works great with the Yamaha Silent Brass system, keeping the pickup cable tidy and out of the way while you practice.

PLA. Each clip is about 16 × 17.4 × 5 mm and 0.45 g. Sold as a 6-pack.

Some images are computer renders.

$15 for a 6-pack · free US shipping
Coming soon

Piccolo stands

Parts that turn a clarinet or trumpet stand into a piccolo trumpet stand.

RenderComputer render: Modular Riser Set, 2 in and 1 in risers
Computer render: 2 in and 1 in risers stackedComputer render: Modular Riser Set, side view

Modular Riser Set

Two threaded risers that raise the piccolo cone on a K&M 15222 clarinet stand (4-leg, 7″ tall). The 1 in and 2 in risers can be stacked. No tools or hardware needed.

Fits the K&M 15222. Female thread on the bottom and male thread on top. Hollow all the way through (21.6 mm, about ⅞″). 2 in riser 40 × 40 × 70.8 mm (1.6 × 1.6 × 2.8″); 1 in riser 40 × 40 × 45.4 mm (1.6 × 1.6 × 1.8″). Printed in PLA.

Image is a computer render, not a photo of a printed part.

$25 · free US shipping
Coming soon
RenderComputer render: Trumpet Stand to Piccolo Cone Adapter
Computer render: adapter, side viewComputer render: adapter, underside showing the female thread

Trumpet Stand to Piccolo Cone Adapter

A low-profile adapter that turns a large K&M trumpet stand into a piccolo trumpet stand. It threads onto the stand’s peg and holds the piccolo cone on top.

Fits the K&M 15213. Female thread for the stand’s male knurled peg (about 36.62 mm diameter, 4 mm pitch) and a male thread on top for the RMK piccolo cone. About 46 × 46 × 47.1 mm (1.8 × 1.8 × 1.85″), raising the cone about 27.1 mm (1.07″). Printed in PLA.

Image is a computer render, not a photo of a printed part.

$12 · plus shipping
Coming soon
RenderComputer render: Piccolo Stand Cone v2 with white inlay and TPU tip cap
Computer render: Piccolo Stand Cone v2, side viewComputer render: cone underside showing the rmktrumpet.com inlay and thread

Piccolo Stand Cone v2

A complete set: the piccolo trumpet cone with a white rmktrumpet.com inlay, a soft TPU tip cap, and the trumpet-stand adapter. The $30 price includes all three.

The cone fits a K&M 15222 clarinet stand on its own. The included adapter threads onto a large K&M trumpet stand (fits the K&M 15213) and holds the cone on top. About 96.6 × 96.6 × 176.8 mm (3.8 × 3.8 × 7.0″) with the cap on. Printed in PLA (cone, inlay, and adapter) plus TPU 95A (cap). The adapter is also sold on its own if you only need that part.

Image is a computer render, not a photo of a printed part.

$30 · free US shipping
Coming soon

Shipping & Returns

RMK Trumpet Gear is designed and 3D printed by Ryan M. King.

Ordering

Checkout will be through Buy on Etsy links on this shop. Those buttons still say Coming soon. Prices on this site match the Etsy listings.

Shipping

Many items include free US shipping, as shown on each product. Some items also have a lower add-on price when added to another order.

Orders ship within 2 business days. If an item does not include free US shipping, it ships by USPS at a flat rate of $7.99. Shipping is within the United States only; international orders are not available.

Custom colors and designs

Custom colors and designs are available on request. Contact me for details.

Returns and refunds

Returns are accepted within 30 days, as long as the item is in like-new condition. The buyer pays return shipping. The original shipping cost — including the cost of free shipping — is deducted from the refund.

Custom-color and custom-design orders can’t be returned.

If an item arrives damaged in shipping, please get in touch.

Etsy’s buyer policies also apply to orders placed through Etsy.

Questions about an order can be sent through the contact page.

Ask about an order

FAQ

What is it made of?

Each piece is 3D printed in PLA and other materials by Ryan.

Will it fit my instrument or stand?

Fit is listed on each product. For example, the stand holders clip onto a Manhasset-style stand, the Mute Holder Extension is made to work with the Hercules HA100 mute holder (sold separately), and the Mic Wire Clip snaps onto ½″ (12.7 mm) valve slide tubes. If you’re unsure, check the product description or get in touch.

Can I get a custom color or design?

Yes. Custom colors and designs are available on request. Contact me for details.

How do I order?

When checkout is ready, you’ll buy through Buy on Etsy links on this shop. The buttons currently say Coming soon. Prices on this site match the Etsy listings.

How long does shipping take?

Orders ship within 2 business days. Items without free shipping go by USPS at a $7.99 flat rate. Shipping is US only; international orders are not available.

What is the return policy?

Returns are accepted within 30 days in like-new condition. The buyer pays return shipping, and the original shipping cost (including the cost of free shipping) is deducted from the refund. Custom-color and custom-design orders can’t be returned. See Shipping & Returns above for the full details.

How should I care for it?

These parts are printed in PLA and other materials, which can soften in high heat, such as inside a hot car. Keep them out of extreme heat when you can.

Do you offer wholesale, bulk or school orders?

Yes. Wholesale, bulk and school orders are welcome, and they need extra production time. Contact me to talk it through.